Skip to content
Manufactured in the USA CONTACT US
POLYEARTHYLENE™

Products

Our products are manufactured from natural, biobased sources, ensuring minimal environmental impact throughout their lifecycle. PolyEarthylene products are durable, thermally stable and FDA Title-21 compliant. Join us in shaping a greener future with bioresins that prioritize sustainability without compromising on quality or performance.

Filters
Clear all
Application
Type

PEL TH 170

Extrusion grade of PolyEarthylene™ suitable for food and beverage bottles, rigid containers and cups.
Application:
Blow Molding
Extrusion and Thermoforming
Melt flow rate:
0.77 g/10min @ 190C/ 2.16kg
Biodegradation resin timeline:
3-5 years
Type:
HDPE
Biobased content:
78%
Recyclability:
Yes
PEL TH 170 SPECS

PEL TH 175

Extrusion grade of PolyEarthylene™ suitable for clamshell containers, food and beverage bottles, bottles and rigid containers.
Application:
Blow Molding
Extrusion and Thermoforming
Melt flow rate:
0.81 g/10min @190C/ 2.16kg
Biodegradation resin timeline:
3-5 years
Type:
HDPE
Biobased content:
>50%
Recyclability:
Yes
PEL TH 175 SPECS

PEL FZ 282

Blown film grade of PolyEarthylene™ suitable for single use and reusable bags with a higher level of clarity than PEL FZ 196.
Application:
Blown Film
Melt flow rate:
1.57 g/10min @190F/ 2.16kg
Biodegradation resin timeline:
1-3 years
Type:
LLDPE
Biobased content:
63%
Recyclability:
Yes
PEL FZ 282 SPECS

PEL IM 277

Injection molding grade of PolyEarthylene™ suitable for toys, caps, chain, and other durable goods.
Application:
Injection Molding
Melt flow rate:
9.5 g/10 min @190C/ 2.16kg
Biodegradation resin timeline:
3-5 years
Type:
HDPE
Biobased content:
56%
Recyclability:
Yes
PEL IM 277 SPECS

PEL IP 242

Injection molding grade of PolyEarthylene™ suitable for food containers, cups and general durable goods.
Application:
Injection Molding
Melt flow rate:
16.8 g/10min @ 230C / 2.16kg
Biodegradation resin timeline:
1-3 years
Type:
PP
Biobased content:
>25%
Recyclability:
No
PEL IP 242 SPECS

PEL IP 269

Injection molding grade of PolyEarthylene™ suitable for durable goods
Application:
Injection Molding
Melt flow rate:
30.1 g/10min @230C /2.16kg
Biodegradation resin timeline:
1-3 years
Type:
PP
Biobased content:
>25%
Recyclability:
No
PEL IP 269 SPECS

PEL FZ 196

Blown film grade of PolyEarthylene™ suitable for single use and reusable bags
Application:
Blown Film
Melt flow rate:
1.90 g/10 min @190C/ 2.16kg
Biodegradation resin timeline:
1-3 years
Type:
LLDPE
Biobased content:
64%
Recyclability:
Yes
PEL FZ 196 SPECS

* MFI calculated per ASTM 1238 in gms/10 min at 190°C for PE type and 230°C and 2.16 kg applied load
** Grades with more rapid biodegradation timelines can be tested according to the curbside recycling guidelines and will undergo careful assessment for recyclability.